A flexible atomizer
Hellvape is again with the Useless Rabbit V3 RTA.
Like its predecessors, it has a dual-coil deck and a prime airflow system, and is sort of faultless.
It’s designed for direct to lung vaping. Its airflow adjustment system allows you to change from barely restricted DL to very ethereal with out shedding something of the flavours. The one draw back lies within the measurement of its deck.
|Capability||3.5 / 5.5ml|
|Meeting kind||Easy and complicated|
|Mounting plate||Double coil|
|Vary of use||Is dependent upon meeting|
What’s within the field?
- Spare tank
- Spare components
- Consumer information
Topped with a 810 format drip tip, the highest cap has a quarter-turn launch system. Little notches give an ideal grip to open it. The airflow adjustment ring is positioned just under. It has 2×7 grooves measuring 3x1mm. A cease limits its rotation, starting from fully closed to fully open. It’s held firmly in place on the atomizer physique by a seal.
The entire atomizer is made from stainless-steel. It’s stuffed via two kidney-shaped holes. Their measurement means most e-liquid bottles in the marketplace can be utilized apart from the biggest Twist kind. A cone-shaped channel avoids any overflows when filling. A big O-ring ensures there are not any leaks between the highest cap and the atomizer physique. The Useless Rabbit V3 RTA comes fitted with a straight glass tank containing 3.5ml. A bubble glass is supplied within the field, permitting you to extend the atomizer quantity to five.5ml.
The identify of the atomizer and the lifeless rabbit brand are engraved on the dome. The within of the atomisation chamber is ultra-reduced, which actually concentrates the flavours. The airflow comes from the edges and enters the deck by way of two large openings on the underside of the reducer.
The bottom of the Useless Rabbit V3 RTA measures 25mm in diameter, however shortly flares out to 27mm. This conical form could also be an issue for the selection of mod if you need issues to line up completely. The constructive pole of the 510 connector is lengthy sufficient to be used on a hybrid mech mod.
A quite small deck
The deck is postless. It has 4 excellent high quality flat screws. 4 BTR screws are supplied within the bag of spare components, along with a full set of spare seals, a flat spanner and a BTR key.
A large peek insulator electrically insulates the constructive put up from the remainder of the deck which is formed out of a single piece. A large O-ring ensures there are not any leaks with the physique of the atomizer.
The energy of the Useless Rabbit V3 RTA lies in its airflow redirection system which sends the air to the edges and backside of the coils. Coupled with a really small atomisation chamber, this atomizer supplies a dense, fragrant vape.
Putting in the coils doesn’t pose any explicit downside. Merely reduce the legs utilizing the information supplied and match them within the posts. Hellvape recommends a top of 5mm. We predict this measurement is ideal.
The one weak level of this RTA is the small measurement of its deck. Though putting in 3mm coils doesn’t pose any explicit downside in itself, this isn’t the only option. Given the area between the 2 airflow grids, the coils are virtually touching, which hinders the air circulation within the atomisation chamber. That is mirrored within the vape. You sometimes get an impression of poor air flow.
Inserting the cotton can be difficult. The dimensions of the wick slots could be very slender. It’s a must to be actually cautious to fluff out the cotton if you wish to keep away from interrupting the wicking and getting a dry hit, however on the identical time go away enough to make sure there isn’t a danger of filling the atomisation chamber by the “speaking vessels” precept.
This operation will be very troublesome for rebuildable newbies.
We most popular to make use of coils 2.5mm in diameter.
On this construct configuration, the air circulates higher within the chamber. The flavours are significantly improved and the expertise is rather more gratifying. Inserting the cotton is far easier and doesn’t pose any explicit downside.
Vaping with the Useless Rabbit V3 RTA is especially good. Mounted on a mech mod with a pair of Ni90 3×28/38 Aliens stabilised at 0.12 ohms and with the airflow totally open, it produces large, dense, heat clouds, good for many who love gourmand flavours. The flavours are wonderful. With a pair of Ni80 2×27/38 Fused Clapton stabilised at 0.18 ohm and 60W on an digital field with the airflow half-closed, it’s simply pretty much as good. The vapour density continues to be wonderful and the flavours are there.
What we like
- Construct high quality
- Simple to construct with 2.5mm coils
- Good vapour manufacturing
- Wonderful flavours
What we don’t like
- Troublesome to construct with 3mm coils
- Change of the bottom diameter 25/27mm